User's Manual

Use Compressed
This enables the CU and MU to transmit and receive respectively in compressed audio.
By default, this is not enabled, thus uncompressed 16-bit audio is used.
Use MU->CU Swap on Sniff Button
This enables MU->CU swap feature, which can only be used when CU and MU(s) have this
feature enabled.
This feature is currently available in 2/3/4 Speaker NACK only.
By default, MU->CU Swap is not enabled.
Audio Snooze must be disabled and this is disabled by default.
When Sniff button is pressed at the MU, it checks for a CU.
If CU is found, CU and MU swaps. MU becomes the new CU and the old CU becomes the MU.
If no CU is found, MU changes into a CU.
When Reset button is pressed at the MU, if it is a new CU, it changes back to MU.
When Reset button is pressed at the CU, it if is a new MU, it changes back to CU.
Please check the audio input and output again after MU->CU swap.
The new CU accepts audio input and the new MU produces audio output.
15