使用产品前请阅读使用说明
EN. You need to provide this serial number if you require technical support for this product. FR. Vous devez fournir ce numéro de série si vous avez besoin d’assistance technique pour ce produit. DE. Diese Seriennummer wird im Bedarfsfall vom technischen Kundendienst für das Produkt abgefragt. ES. Si necesita asistencia técnica para este producto, tendrá que proporcionar este número de serie. PL. W razie korzystania z pomocy technicznej odnośnie tego produktu, muszą Państwo podać ten numer. CZ.
Overview A Audio Control Module (ACM) 5 B Sound Card 6 19 12 13 2 3 14 4 15 16 B) Sound Card 12. ACM Link Port 13. Front Left 14. Front Right 15. Rear 16. Center / Subwoofer 17. Optical Out 18. Optical In 19. Op-Amp Pair 1 (Single DIP) 20. Op-Amp Pair 2 (Dual DIP) 1 7 8 9 10 20 A) Audio Control Module (ACM) 1. XLR/6.3mm Microphone In 2. +48V Phantom Power Button 3. Volume/Status Display 4. Headphone Impedance Selector Switch 5. ACM Link Cable 6. AUX In (Left/Right) 7. 3.
Connecting The Power Supply PC Power Supply Unit ^ Power Supply PCI Express Connector Sound Card Connector Catch GND Ensure that the 6-pin PCI Express power supply connector’s latch is properly fitted into the sound card connector’s catch.
Installing The Sound Card A B (i) PCI slot (ii) PCIe slot 1 Unplug the computer’s power cable 2 Remove the computer’s case 1 C Remove the existing sound card 2 Remove the PCIe slot’s metal enclosure D 1 Gently but firmly slot the Sound Blaster AE-9 sound card into the PCIe slot 2 Plug the power cable back into the computer Replace the computer’s case
Connecting Devices To The Sound Card (ii) Front (i) Y-Splitter Cable Front (Left) (i) Y-Splitter Cable Front (Left) Front (Right) Front (Right) (ii) Front (vi) Rear (iv) Optical Out (vii) Center/Subwoofer (v) Optical In (ii) Front (vi) Rear (vii) Center/ Subwoofer (iii) Audio Inputs A 2.0 / 2.1 Analog Speakers B AV Receiver C Blu-ray / DVD Player D 5.
Connecting Devices to The Audio Controle Module (ACM) * * OR *1/8” to 1/4” adapter not included / Adaptateur de 1,8” à ¼” non inclus / Adapter von 1,8 ”bis ¼” nicht enthalten / adaptador 1.8¨ a ¼¨ no incluida / *1.8” to ¼” adapter ikke inkluderet / *1.8” > ¼” -adapteri ei tule mukana / *1.8” til ¼” adapter er ikke inkludert / *1.8” to ¼” adapter ej inkluderat / Adapter 1,8” do ¼” niedołączony do zestawu / Redukce z 1,8” na ¼” není součástí balení / Adaptér 1.8” na ¼” nie je súčasťou balenia / 3.5mm-6.
Display & Control Interface (B) Volume Display (A) +48V Button ON: Enable +48V Phantom power to XLR mic (C) Headphone Impedance Selector Switch dB Min. IEM: 16 - 31Ω in-ear monitor dB Max. Normal(N): 32 - 149 Ω in-ear / headphones OFF: Disable +48V Phantom power to XLR mic High: 150 - 600 Ω headphones +48V Phantom power is available on XLR connector only.
Product Registration Download Unlock your Sound Blaster AE-9 with the Sound Blaster Command software. Download at creative.com/support/SBAE-9 Registering your product ensures you receive the most appropriate service and product support available. You can register your product during installation or at www.creative.com/register. Please note that your warranty rights are not dependent on registration. Technical & Customer Support Services Visit creative.
