User's Manual
Table Of Contents
- Congratulations!
- Your Headset At a Glance
- Using Your Sound Blaster Tactic3D Rage Wireless
- Using the Software
- Installation and Uninstallation - Windows
- Installation and Uninstallation - Mac
- Using the Sound Blaster Tactic(3D) Control Panel
- Managing Your Profiles
- Customizing Your Display Avatar
- Adjusting Your Volume Settings
- Configuring your general settings
- Enhancing the Audio - SBX Pro Studio
- Enhancing the Microphone - VoiceFX™
- Equalizer Settings
- Customizing the Illumination and Theme
- General Specifications
- Troubleshooting
- What do the various LED statuses mean?
- The onboard audio chipset seems to be in conflict with Sound Blaster Tactic3D...
- No sound from the headset.
- There is clipping/distortion during audio playback.
- Some features are disabled when playing certain games.
- Electronic interferences is occurring with other wireless devices.
- Music is not being transmitted to my headset.
- Safety Information
- Regulatory Information
- Notice for the USA
- Federal Communication Commission (FCC) Radiation Exposure Statement
- Notice for Canada
- European Compliance
- WEEE DIRECTIVE 2002/96/EC
- BATTERIES DIRECTIVE 2006/66/EC
- Ukraine RoHS Statement
- Notice for Australia / New Zealand
- Notice for Korea
- Turkey RoHS Statement
- Notice for Singapore
- Notice for Japan
- Vietnam RoHS Statement
Troubleshooting 20
Troubleshooting
What do the various LEDstatuses mean?
The Sound Blaster Tactic3D Rage Wireless headset and USB wireless transmitter is equipped with
various LEDs that indicate the status of the device. Each LED, their possible statuses and
corresponding explanations are listed in the tables below:
Headset LEDs
LED Status Description
Power LED
Flashing Slowly (White) Charging
Stable (White)
Headset is turned on.
If headset is connected to
the charging cable, this
status also indicates that
charging is complete.
Flashing Rapidly (White)
and a soft beeping sound
emits from the headset
Headset has low power.
Please charge your headset.
Off
Headset is off.
If headset is connected to
the charging cable, this
status also indicates that
charging is complete.
Connect LED
Flashing Rapidly
Pairing mode is activated.
The headset is searching for
a compatible wireless
transmitter to be paired to
Stable
Headset is paired to a
corresponding wireless
transmitter
Microphone Mute LED
Stable (Red) Microphone is muted.
Off Microphone mute is off.
USBTransmitter
Connect LED
Flashing Rapidly (white)
Pairing mode is activated.
The transmitter is searching
for a compatible headset
that is in range.
Flashing slowly (white)
USB transmitter is not
paired to any headset.
Stable (white)
USB transmitter is paired to
a headset.