User's Manual
Table Of Contents
- Congratulations!
- Your Headset At a Glance
- Using Your Sound Blaster Tactic3D Rage Wireless
- Using the Software
- Installation and Uninstallation - Windows
- Installation and Uninstallation - Mac
- Using the Sound Blaster Tactic(3D) Control Panel
- Managing Your Profiles
- Customizing Your Display Avatar
- Adjusting Your Volume Settings
- Configuring your general settings
- Enhancing the Audio - SBX Pro Studio
- Enhancing the Microphone - VoiceFX™
- Equalizer Settings
- Customizing the Illumination and Theme
- General Specifications
- Troubleshooting
- What do the various LED statuses mean?
- The onboard audio chipset seems to be in conflict with Sound Blaster Tactic3D...
- No sound from the headset.
- There is clipping/distortion during audio playback.
- Some features are disabled when playing certain games.
- Electronic interferences is occurring with other wireless devices.
- Music is not being transmitted to my headset.
- Safety Information
- Regulatory Information
- Notice for the USA
- Federal Communication Commission (FCC) Radiation Exposure Statement
- Notice for Canada
- European Compliance
- WEEE DIRECTIVE 2002/96/EC
- BATTERIES DIRECTIVE 2006/66/EC
- Ukraine RoHS Statement
- Notice for Australia / New Zealand
- Notice for Korea
- Turkey RoHS Statement
- Notice for Singapore
- Notice for Japan
- Vietnam RoHS Statement
Using Your Sound Blaster Tactic3D Rage Wireless 8
Manual Pairing
Your headset is automatically paired to the wireless transmitter it is packaged with out of the box.
However, certain situations such as the use of a new wireless transmitter, errors in connection etc.
may result in the need to manually pair your headset to the transmitter. The procedure for manual
pairing is as follows:
Step 1 : Activate pairing mode on the headset
Press and hold the Microphone Mute button on the headset for 3 seconds. The connect LED will begin to
flash rapidly.
Step 2 : Activate pairing mode on the transmitter
Press and hold the Connect button on the USB wireless transmitter for 3 seconds. The Connect LEDon
the transmitter will begin to flash rapidly.
Step 3 :Pairing success
When the headset and the transmitter are paired, the Connect LEDon both devices will stop flashing
and stabilize.