User's Manual
Table Of Contents
- Congratulations!
- Overview
- Using Your Sound Blaster EVO Wireless
- Using the Software
- General Specifications
- Troubleshooting
- What do the various LED statuses mean?
- The onboard audio chipset seems to be in conflict with Sound Blaster EVO Wire...
- No sound from the headset.
- There is clipping/distortion during audio playback.
- Some features are disabled when playing certain games.
- Electronic interferences is occurring with other wireless devices.
- Music is not being transmitted to my headset.
- Problem with NFC pairing.
- Additional Guide for Windows Users
- Tips for iPhone Users
- Safety Information
- Regulatory Information
- Notice for the USA
- Federal Communication Commission (FCC) Radiation Exposure Statement
- Notice for Canada
- European Compliance
- WEEE DIRECTIVE 2002/96/EC
- BATTERIES DIRECTIVE 2006/66/EC
- Ukraine RoHS Statement
- Notice for Australia / New Zealand
- Notice for Korea
- Turkey RoHS Statement
- Notice for Singapore
- Notice for Japan
- Vietnam RoHS Statement
- License and Copyright
Using the Software 22
Equalizer Settings
Equalizers allows you to filter various audio frequency, thus controlling the tone of your audio output.
TheSound Blaster EVO Control Panel comes equipped with a range of preset equalizer settings,
helping you to select different audio tones easily. You can also manually modify or add equalizer
presets.
To configure Equalizer settings, go to the SBXProfile screen and select a profile. Click Edit and then
click Equalizer. To adjust and apply an equalizer preset,
1. Check the EQ checkbox to enable the use of the equalizer.
2. From the drop down menu, select the preset to use.
3. Adjust the vertical slider bars to achieve your desired level.
4. Click Save to save the changes to the active preset or to a new preset.
You can also delete any user created equalizer presets by selecting the preset from the drop down
menu and clicking Delete.
Note:
All default equalizer presets cannot be deleted.