User's Manual
Table Of Contents
- Congratulations!
- Overview
- Using Your Sound Blaster EVO Wireless
- Using the Software
- General Specifications
- Troubleshooting
- What do the various LED statuses mean?
- The onboard audio chipset seems to be in conflict with Sound Blaster EVO Wire...
- No sound from the headset.
- There is clipping/distortion during audio playback.
- Some features are disabled when playing certain games.
- Electronic interferences is occurring with other wireless devices.
- Music is not being transmitted to my headset.
- Problem with NFC pairing.
- Additional Guide for Windows Users
- Tips for iPhone Users
- Safety Information
- Regulatory Information
- Notice for the USA
- Federal Communication Commission (FCC) Radiation Exposure Statement
- Notice for Canada
- European Compliance
- WEEE DIRECTIVE 2002/96/EC
- BATTERIES DIRECTIVE 2006/66/EC
- Ukraine RoHS Statement
- Notice for Australia / New Zealand
- Notice for Korea
- Turkey RoHS Statement
- Notice for Singapore
- Notice for Japan
- Vietnam RoHS Statement
- License and Copyright
Using Your Sound Blaster EVO Wireless 5
Using Your Sound Blaster EVO Wireless
Set up your headset in four simple steps:
1. Charge Your Headset
2. Install the Software
3. Pair the headset with your NFC / BT devices OR
4. Connect the headset to your computer / mobile device
Step 1 :Charge Your Headset
You are recommended to charge your headset for 8 hours before it is used for the first time. Connect
your headset to your computer using the MicroUSB-to-USB cable, or connect it to a power supply via
an adapter (available separately). The LEDflashes red when charging.
Using Your Headset While Charging
During subsequent charges, you can use your headset while it charges. The LED will light in red while
charging and return to its last status when fully charged.
You can also check the status of the battery via the battery indicator at the top right corner of the
Sound Blaster EVO Control Panel. Please refer to Using the Software for details on this software.
Note:
The low battery tone will start beeping to inform users of its status 15 minutes before the
headset is completely powered off.