User's Manual

For auto pairing
1. Turn on your wireless receiver, it will automatically search for a signal from your audio device and
establish a connection.
For manual pairing
1. Press the Connect LED button on your audio device.
The LED flashes green.
2. Turn on your wireless receiver and press its Connect button, it will search for a signal from your
audio device and establish a connection.
The LED stops flashing.
Notes
 While the LED is flashing, you have three minutes to pair a device. If you have not done so before
the time is up, the LED stops flashing and you will have to press the Connect LED button again.
 To erase all paired zones and reset settings to their factory default values, press and hold the
Connect LED button for five seconds. It will flash twice and turn off for two seconds. You must also
reset your wireless receiver or supported device. For instructions on how to do so, consult the
documentation of the device.
 Other supported devices may have different ways to initiate pairing. For details, consult the
documentation of the device.
Playing/Recording Music
You can play music from, and/or record music to external devices (for example, MP3 players, Digital Audio
Tape players/recorders and MiniDisc players/recorders) by connecting them to your Sound Blaster X-Fi
Notebook.
Playing music from external devices:
Connecting your MP3 player
Connectivity or Features Description
Page
11
of
19
How to use this manual
17/4/2008
file://C:\Users\Lee Fong\AppData\Local\Temp\~hhC3B1.htm