User's Manual

1. Click the Mixer button.
2. Drag the Amount sliders up or down to increase or decrease the volume of each component.
Adjust performance settings
1. Click the Performance button.
2. Select the desired bit-depth from the drop down list.
3. Select the desired sampling rate from the drop down list.
Playback audio through onboard speakers
1. Click the Playback through Notebook Speakers button.
2. Select the Enable audio playback through Notebook Speakers check box.
Control wireless music settings
1. Click the Wireless Music Control button.
2. Select the Enable Wireless Music Control check box.
3. Select Broadcast or Zone
4. Select the Show Wireless Music Control status on startup check box.
General Specifications
Versatile Audio Features
 Playback of up to 64 audio channels, each at an arbitrary sample rate
 24-bit Analog-to-Digital conversion of analog inputs at 48 kHz sampling rate
 16-bit Digital-to-Analog conversion of digital sources at 48 kHz to stereo output
 16-bit Digital-to-Analog conversion of stereo digital sources at 48 kHz to stereo output
 16-bit recording sampling rates: 8, 11.025, 16, 22.05, 24, 32, 44.1, and 48 kHz.
Notes
 Depending on your system configuration, output sampling frequency may only be available at 48
kHz.
X-Fi CMSS-3D
 X-Fi CMSS-3D Headphone: Provides a multichannel playback experience over headphones for all
types of content
 X-Fi CMSS-3D Virtual: Provides a multichannel playback experience over two loudspeakers for all
types of content
Connectivity
Sound Blaster X-Fi Notebook
Audio Inputs
 One 3.50 mm (1/8-inch) stereo jack for Analog Line In or Microphone In
Audio Outputs
 One 3.50 mm (1/8-inch) stereo jack for Analog Line Out or Headphones
Interfaces
 Wireless transmitter to connect with supported wireless devices.
Troubleshooting
Page
17
of
19
How to use this manual
17/4/2008
file://C:\Users\Lee Fong\AppData\Local\Temp\~hhC3B1.htm