User Manual
Table Of Contents
- About Your Receiver
- About Your Remote Control
- Setting Up Your Receiver
- Setting Up Two or More Receivers
- About Broadcasting and Zone Control
- Manual Pairing
- Using Your Receiver
- Using Your Wireless Features
- Troubleshooting Wireless Features
- FAQs
- General Specifications
- Safety Information
- Declaration of Conformity
- Regulatory Information
Press the Connect button on your transmitter again 15
Step 3: Press the Connect button on your transmitter
again
The transmitter’s Link/Connect LED flashes. Refer to the diagram in Step 1.
Step 4: Press the Connect button on your second receiver
Refer to the diagram in Step 2. Once the transmitter and receiver are paired
successfully, the Link/Connect LED on both units light up green and remain
on. Repeat the steps to pair your third and fourth receivers (if applicable)
manually.
Step 5: Test your receivers
1 Play music from your transmitter.
2 Press the Zone number buttons (1 to 4) assigned to the receivers you want
to activate or deactivate.
For more information on how to use your Broadcast, Wireless Zone and
Zone buttons, see “Using Your Wireless Features” on page 18.
NOTE
For Sound Blaster X-Fi Notebook, perform these functions using
Entertainment Mode.