User Manual
Table Of Contents
- About Your Receiver
- About Your Remote Control
- Setting Up Your Receiver
- Setting Up Two or More Receivers
- About Broadcasting and Zone Control
- Manual Pairing
- Using Your Receiver
- Using Your Wireless Features
- Troubleshooting Wireless Features
- FAQs
- General Specifications
- Safety Information
- Declaration of Conformity
- Regulatory Information
Troubleshooting Wireless Features 23
My receiver seems to be picking up extra noise, or there are inter-
mittent pauses.
The placement of your receiver as well as the signals from other wireless
routers or Bluetooth equipment may affect the quality of the transmission.
Try the following:
• Move your transmitter and receiver closer to each other. For best
performance, place your transmitter and receiver on the same floor.
• Place your transmitter or receiver away from other devices that transmit
wireless signals. The receiver may also pick up noise from nearby power
supply equipment.
• Reposition your transmitter or receiver so that there are fewer objects
(for example, multiple walls or large metal structures) between them.
I have two Creative transmitters. My receiver is receiving the
incorrect transmission.
Your receiver may be alternating transmissions between the transmitters.
Try the following:
• Manually pair your receivers. See “Manual Pairing” on page 12.
• Set your receiver’s Mode switch according to the transmitter you are
using.
Mode 1 : For Xdock Wireless or Xmod Wireless
Mode 2 : For MovieWorks HD or Sound Blaster X-Fi Notebook