User's Manual
Table Of Contents
- Congratulations!
- System Requirements
- About Your Devices
- Setting Up Your Wireless System
- Using Creative Music Server
- Using the Controller
- Playing and Managing Music
- Managing Broadcast and Zone modes
- Using Your Audio Device
- Software Suite
- Standalone Operation (Optional)
- Troubleshooting
- General Specifications
- Safety Information
- Regulatory Information
Pair the Receiver 9
Step 5: Pair the Receiver
1 Click the Add Receiver... button on the
Wireless Setup Wizard window.
2 Select “Sound Blaster Wireless
Receiver” from the list. Alternatively, you
can enter or select an appropriate label
and image for the Receiver (e.g., select
“Bedroom” if the Receiver will eventually
be placed in the bedroom).
3 Click the Connect button.
4 Turn on your Receiver and the attached speakers. Press the Connect button at the back of the
receiver. Once the Transmitter and Receiver are paired successfully, the Connect LED lights
up green and remain on. You should also hear a test tone played through the speakers that
are attached to the Receiver.
5 You can now play and enjoy wireless music throughout your home. For more information on
playing and streaming music, see “Playing and Managing Music” on page 12.
C
O
N
N
E
C
T
5V DC
LINK /
CONNECT
5V DC
LINK /
CONNECT