User's Manual

Using Your Remote Control 4-1
Using Your Remote Control
Selecting Menu
Options
You can use the Navigation buttons to scroll and select menu options. For example,
if you are in the Now Playing List menu:
1. Press the Up and Down buttons to scroll up and
down the menu.
2. Press the Right button or OK button to select a
highlighted menu option, or show a list of additional
options for the highlighted menu option.
3. Press the Left button to return to the previous
menu.
Using Multiple
Wireless
Receivers
You can use up to four Wireless Receivers on a wireless network. If you are using
mutilple Wireless Receivers, you can use one Remote Control to control all the
Wireless Receivers. However, your Remote Control can only control one Wireless
Receiver at a time. To select the Wireless Receiver that your Remote Control
controls, you need to assign the Remote Control to the Wireless Receiver that you
want to control
To assign a Remote Control to a Wireless Receiver
1. Press and hold the MODE button on the Remote Control until the LED on the
Wireless Receiver starts flashing. This may take about 5 seconds.
2. Press the FIND REMOTE button on the Wireless Receiver.
The Remote Control is now assigned to this Wireless Receiver. Repeat this
procedure to assign the Remote Control to another Wireless Receivers.