User's Manual
Table Of Contents
- Creative Sound Blaster Wireless Music
- Contents
- Introduction
- Your Sound Blaster Wireless Music At A Glance
- Getting Started
- Using Your Remote Control
- Configuring Settings
- About Music Files
- Frequently Asked Questions
- Maintenance and Safety Advice
- Technical Specifications
- Glossary
- Ad-hoc mode
- Antenna
- Access Point (AP)
- Bandwidth
- BSS (Basic Service Set)
- DHCP (Dynamic Host Configuration Protocol)
- Dynamic IP address
- Encryption
- IEEE 802.11
- IEEE 802.11b
- IEEE 802.11g
- Infrastructure mode
- IP (Internet Protocol)
- IP address
- LAN (Local Area Network)
- MAC (Media Access Control) address
- Router
- SSID (Service Set Identity)
- Static IP address
- TCP/IP (Transmission Control Protocol/ Internet Protocol)
- USB (Universal Serial Bus)
- WEP (Wired Equivalent Privacy)
- Wi-Fi
Configuring Settings 5-2
Configuring
Smart Playlist
preferences
1. In the SB Wireless Music Application, click the Smart Playlist button.
2. In the Smart Playlist Manager dialog box, click the New button to create a
new Smart Playlist.
3. Enter a name for your Smart Playlist in the Smart Playlist Name box.
4. Select your preferences and click the OK button.
5. To change settings of an existing Smart Playlist, select a Smart Playlist in the
Smart Playlist available box of the Smart Playlist Manager dialog box,
and click the Edit button.
Configuring
FAVORITES
buttons
1. In the SB Wireless Music Application, click the Settings button.
2. Click the Favorites Playlist tab.
Figure 5-2