User's Manual
Table Of Contents
- Creative Sound Blaster Wireless Music
- Contents
- Introduction
- Your Sound Blaster Wireless Music At A Glance
- Getting Started
- Using Your Remote Control
- Configuring Settings
- About Music Files
- Frequently Asked Questions
- Maintenance and Safety Advice
- Technical Specifications
- Glossary
- Ad-hoc mode
- Antenna
- Access Point (AP)
- Bandwidth
- BSS (Basic Service Set)
- DHCP (Dynamic Host Configuration Protocol)
- Dynamic IP address
- Encryption
- IEEE 802.11
- IEEE 802.11b
- IEEE 802.11g
- Infrastructure mode
- IP (Internet Protocol)
- IP address
- LAN (Local Area Network)
- MAC (Media Access Control) address
- Router
- SSID (Service Set Identity)
- Static IP address
- TCP/IP (Transmission Control Protocol/ Internet Protocol)
- USB (Universal Serial Bus)
- WEP (Wired Equivalent Privacy)
- Wi-Fi
Frequently Asked Questions B-5
How many Wireless Receivers can I use on a wireless network?
A wireless network can support up to four Wireless Receivers playing at the same
time. Additional Wireless Receivers may be installed provided that not more than
four are playing at the same time.
How do I reset my Wireless Receiver?
For normal operation, you only need to set your Wireless Receiver to standby using
the Remote Control.
However, if you want to fully reset your Wireless Receiver, disconnect your
Wireless Receiver from the power outlet and wait for a few seconds before
reconnecting it to the power outlet.
How do I create playlists using my Remote Control?
You can create Smart Playlists using your Remote Control. Smart Playlists are
automatically generated playlists of your music collection. Smart Playlists are
generated according to the preferences that you set using the SB Wireless Music
Application.
Can I search from tracks using my Remote Control?
Yes, you can search for tracks by artist, album and genre using your Remote
Control. For more information, see "Playing Music" on page 4-2.
What do I do if my Remote Control does not display anything?
❑
Press the Power button on your Remote Control
❑ Make sure the batteries are not flat, and are properly inserted in your Remote Control
❑ Make sure you are using your Remote Control within 10 meters (33 feet) of your Wireless
Receiver
❑ Make sure your Wireless Receiver is connected to a power outlet, and the power outlet is
turned on if necessary
What do I do when the Info menu on my Remote Control displays
the "No Server" message?
❑
Make sure the SB Wireless Music Server is running on your computer. You will see the SB
Wireless Music Server icon in your computer’s system tray when the SB Wireless Music