User's Manual

Getting Started 3-2
4. If yours is the only wireless network operating in the vicinity, the software will
automatically detect and connect to it. If not, the SB Wireless Music
Configuration — Network dialog box will appear. Select a network from the
list available networks, and click the Next button.
If your network is not listed, click the Scan button to refresh the list of
available networks, or select the Use this SSID option and enter the SSID of
the network you want to connect to.
5. If the selected network is WEP encrypted, enter the encryption information in
the SB Wireless Music Configuration — Encryption dialog box, and click
the Next button. Refer to the User’s Guide of your wireless router or access
point to learn how to check your network’s encryption information.
6. In the SB Wireless Music Configuration — IP Settings dialog box, we
recommend that you select the Obtain an IP address automatically option.
Only select the Use the following IP address option if you are familiar with
setting up a static IP address.
7. Click the Next button.
8. Click the OK button. If the settings you have selected are incompatible with
your network, you will return to the first setup page so that you can select the
correct settings.
9. Follow the onscreen instructions to complete the installation, and restart you
computer when you are prompted to do so.
If your network is WEP
enabled, make sure it is
in Open mode. Share
Key mode is not
supported by Sound
Blaster Wireless Music.