User's Manual
Table Of Contents
- Creative Sound Blaster Wireless Music
- Contents
- Introduction
- Your Sound Blaster Wireless Music At A Glance
- Getting Started
- Using Your Remote Control
- Configuring Settings
- About Music Files
- Frequently Asked Questions
- Maintenance and Safety Advice
- Technical Specifications
- Glossary
- Ad-hoc mode
- Antenna
- Access Point (AP)
- Bandwidth
- BSS (Basic Service Set)
- DHCP (Dynamic Host Configuration Protocol)
- Dynamic IP address
- Encryption
- IEEE 802.11
- IEEE 802.11b
- IEEE 802.11g
- Infrastructure mode
- IP (Internet Protocol)
- IP address
- LAN (Local Area Network)
- MAC (Media Access Control) address
- Router
- SSID (Service Set Identity)
- Static IP address
- TCP/IP (Transmission Control Protocol/ Internet Protocol)
- USB (Universal Serial Bus)
- WEP (Wired Equivalent Privacy)
- Wi-Fi
Using Your Remote Control 4-5
Playing a track 1. Press the MENU button.
2. Scroll to the Music Library option and press the Right button or OK button
3. Scroll to the All Tracks option and press the Right button or OK button.
4. Scroll to the first letter of the track you want to play and press the Right
button or OK button. If the track starts with a number or punctuation mark,
scroll to 0-9 and press the Right button or OK button.
5. Scroll a track and press the Play button to start playback, or press and hold
the Play button to add the selected track to the Now Playing List.
Playing all tracks 1. Press the MENU button.
2. Scroll to the Music Library option and press the Right button or OK
button.
3. Scroll to the All Tracks option and press the Play button to start playback.
Viewing the
Now Playing
List
Press the NOW PLAYING button to view the Now Playing List. You can view the
Now Playing List at anytime. If a track is being played back the following
information is displayed:
❑
artist and album name
❑ title of the track
❑ elapsed time
❑ order number of current track and total number of tracks in the Now Playing List