User's Manual
Table Of Contents
- Creative Sound Blaster Wireless Music
- Contents
- Introduction
- Your Sound Blaster Wireless Music At A Glance
- Getting Started
- Using Your Remote Control
- Configuring Settings
- About Music Files
- Frequently Asked Questions
- Maintenance and Safety Advice
- Technical Specifications
- Glossary
- Ad-hoc mode
- Antenna
- Access Point (AP)
- Bandwidth
- BSS (Basic Service Set)
- DHCP (Dynamic Host Configuration Protocol)
- Dynamic IP address
- Encryption
- IEEE 802.11
- IEEE 802.11b
- IEEE 802.11g
- Infrastructure mode
- IP (Internet Protocol)
- IP address
- LAN (Local Area Network)
- MAC (Media Access Control) address
- Router
- SSID (Service Set Identity)
- Static IP address
- TCP/IP (Transmission Control Protocol/ Internet Protocol)
- USB (Universal Serial Bus)
- WEP (Wired Equivalent Privacy)
- Wi-Fi
Frequently Asked Questions B-6
Server is running. The system tray is usually located at the bottom right corner of your
desktop.
❑ Make sure your computer and your Wireless Receiver are within transmission range of
your wireless router or access point
❑ Make sure your Wireless Receiver is connected to the wireless network.
❑ If using static IP address, make sure that there is no IP address conflict with another
computer or device
How do I reset my Remote Control?
Remove your Remote Control’s batteries, and then re-insert them.
Why does the LCD of my Remote Control go blank after a few
seconds?
This is a power saving feature of your Remote Control. Pushing any button on the
Remote Control will display the menu options on the LCD again. Note that pushing
any of the blue buttons on the Remote Control will immediately activate the
Wireless Receiver. For example, if you press the Play button, playback will start.
Why does nothing happen when I press a FAVORITES button on my
Remote Control?
The first three FAVORITES buttons are preset with Smart Playlists for your
convenience. You have to manually set the other FAVORITES buttons using the
SB Wireless Music Application. You can manually set all of the FAVORITES buttons.
Why does music play when I press the Play button without selecting
anything?
This is feature is for your convenience. When nothing is selected and the Play
button is pressed, the playlist assigned to the first FAVORITES button will be
played back.
Why is there no beeping sound from my Remote Control when I
press the FIND REMOTE button on my Wireless Receiver?
❑
Your Remote Control may be out of range.
❑ Your Remote Control’s batteries may be flat