User's Manual
Table Of Contents
- Introduction
- Playing and Managing Media Files
- Customizing Your Player
- Safety and Regulatory Information for Zen X-Fi 3
- License and Copyright
Performing a Manual Scan
1. Connect your earphones to the earphone jack.
Your earphones act as an antenna and must be connected to your player to receive radio signals.
2. On the main menu, select FM Radio.
3.
Press , and then press to switch from Preset Tuning to Manual Tuning.
On your display, the word 'preset' disappears.
4.
Press and hold or to scan for the next available radio station.
Press or to fine-tune the frequency.
5.
Press and select Save as Preset.
6. Select an empty preset denoted by "--.-- MHz".
If you have selected an existing preset, you will be prompted to confirm that you want to replace the current preset.