User's Manual

List of button, indicator and connector functions

Button Function

Power / Pair Press and hold for about 2 seconds to power on the

headphones. Press and hold for about 4 seconds to

power off the headphones. In off mode, press and hold

for more than 4 seconds to activate Pairing mode.

Play / Pause Press to play. Press again to pause playback.

Next, Forward / Previous,

Rewind Track

Press to change to the next or previous track. Press and

hold to fast forward or reverse track (this function is

device dependent).

Volume Up / Volume Down Press ‘+’ to increase or press ‘-‘ to decrease volume. A

beep tone is emitted at maximum volume level. Pause

headphones to mute.

Light Indicator Function

Right earcup light indicator Green and blinks slowly: automatically searching and

attempts to connect to the last paired device.

Blue and blinks slowly: connected to a paired device.

Blue and blinks rapidly: in pairing mode and is ready to

pair with a new device.

Red and blinks twice: powering off the headphones.

Red and blinks slowly: low battery, charge headphones

soonest. This is accompanied by a beep tone every 2

minutes.

Left earcup light indicator Red: charging headphones.

Green: headphones fully charged.

Connector Function

Micro-USB charging connector Use the supplied USB cable for charging the headphones

via a laptop or computer.