Safety instructions English Please read the following before using Creative products: · To be completely disconnected from the power input, the mains plug has to be disconnected/ detached from the mains. · Disconnect the mains plug when the device is expected to be unused for several days. · Remove the batteries when not in use for an extended period of time.
1 Product Overview / Connectivity Diagram 4 4 13 2 5 3 Side views of the Audio Control Pod: [ 1 7 9 8 10 [ 11 6 12 * Audio Control Pod LED status indications: 2 1 2 3 4 4 AC IN Right Satellite Speaker Left Satellite Speaker Audio In - To analog audio in 3 GREEN – Line-In/ AUX In AMBER – USB Audio BLUE – Bluetooth Connection 5 USB – USB Audio 6 Audio Control Pod 7 Bass Level Control 8 Headphone 9 Power ON/OFF 10 Source * optional (sold separately) 11 CONNECT Button – Bluetooth Pair
2 3 Remote Control overview Enjoy high performance wireless audio from ZiiSound T6 via Bluetooth® Audio Transmitter BT-D1 Your new hardware is installed and ready to use. Installing device . . .
... 4 To pair and CONNECT the ZiiSound T6 with other Bluetooth devices 5 A Power on the speaker and the LED status indicator will show green. Switching between Paired Devices Switch between your current connected device to your previous connected devices by following these steps: Note: Allow the flashing LED indicators to stop after plugging the speaker system to the mains. This indicates that the speaker system is initialized and ready to be powered ON. ... ...
7 To establish a new connection between BT-D1 with ZiiSound T6 A Press and hold CONNECT button for 3 seconds while ZiiSound T6 is ON. ... ... Your new hardware is installed and ready to use. Installing device . . . After the BT-D1 has been paired to device, it. will always attempt to reconnect to the paired device .. when the BT-D1 is plugged into a USB port. Always ensure that the receiving device has its Bluetooth enabled and ready to accept connections. You may also try the following.
9.1 Enjoy 5.1 audio via USB connection In Windows XP Control Panel, open Sounds and Audio Devices Properties. Under the Audio tab, verify that ZiiSound T6 USB Audio is selected under Sound playback. Under Sound playback setting, click the Advanced button to open Advanced Audio Properties. Windows XP setup 1. Plug in the USB cable, wait for a series of “Found New Hardware” messages to appear on your computer screen.
9.2 Windows Vista / 7 Setup D Click on Configure and ensure that 5.1 surround is selected under Audio Channels. A Please ensure that the correct audio source is selected by right clicking on the Volume icon on the system tray. B Select Playback Devices. E Click Next for the next few configuration windows to accept defaults until setup is finished. C Select ZiiSound T6 USB Audio and click Set default.
.3 Mac OS® X audio setup C Select 5.1 Surround, click Apply and then click Done. A Open the Applications, Utilities then Audio MIDI Setup. D Close all panels. Your ZiiSound T6 is now ready for use.
Playback with other audio devices via AUX In 11 Wall-mountable satellites Ziisound T6 satellites can be wall-mountable, for more specific instructions on wall mounting, please consult your wall mount adapter manufacturer’s manual. For more information, please refer to creative.
FAQ Perform the following trouble-shooting steps before sending it for servicing. For more information, please refer to support.creative.com There’s no Bluetooth link between my device and the ZiiSound T6.
MODIFICATION: Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the device. être nul. Néanmoins, par souci extrême de prudence, Creative a choisi de placer l’avertissement de la Proposition 65 sur ses produits. Federal Communication Commission (FCC) Radiation Exposure Statement Notice for Canada This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
DECLARATION OF CONFORMITY Manufacturer / Importer’s Name : Creative Labs, Inc. Manufacturer / Importer’s Address : 1901 McCarthy Boulevard Milpitas, CA. 95035 United States Tel: (408) 428-6600 Notice for Australia/New Zealand This product complies with the requirements of the ACMA Radiocommunications (Electromagnetic Compatibility) Standard 2008.
26
