2 15 25 35 45 55 65 75
Congratulations on purchasing the ZiiSound DSx Wireless Subwoofer, a perfect complement to the ZiiSound series of wireless speaker systems featuring SLAM (Symmetrically Loaded Acoustic Module) Technology. Experience a whole new definition of freedom in placement for that perfect acoustic projection with our wireless systems. EN For detailed product information, instructions or to find out more about our speakers, visit www.creative.
Technical Specifications 1 Product Overview / Connectivity Diagram • Input Rating: 100-240V~ 50/60Hz 300mA • Operating Frequency : 5725 – 5850 Mhz • Supported Speaker models : ZiiSound D5x , ZiiSound D3x • Operating Range: Up to 30 meters (Measured in open space. Walls and structures may affect range of device.) 1 Note: Compliance markings are located at the back of this product.
2 To Power ON the ZiiSound DSx 4 5 6 4 LINK Button For various actions to LINK and connect to ZiiSoundD5x or D3x 5 Bass Level Control To Increase or decrease the bass level 6 AC IN Attach supplied AC cord into AC IN, then into mains LED Status Subwoofer Status Off Standby Plug in the AC cord into the AC IN and switch on the mains. The ZiiSound DSx is powered ON and in standby mode.
3 To link up with the ZiiSound D5x or D3x To link to the ZiiSound D5x or D3x master speaker unit, the ZiiSound DSx needs to be in LINK Discoverable mode for the master speaker unit to establish a link to ZiiSound DSx. To activate LINK discoverable mode, follow the instructions below. To de-link the ZiiSound DSx from any master speaker unit for linking to another master speaker unit, perform the following instructions below.
5 Return to factory default setting Follow these steps to return to factory setting. Action LED Status Press and hold the LINK button for 10 seconds when the subwoofer is powered ON Two Led Flashes and Led stops blinking Wireless subwoofer is cleared of memory and in standby mode. Ready for next user action. I am having difficulty in linking up the ZiiSound DSx with the ZiiSound D5x or D3x.
Regulatory Information The following sections contain notices for various countries: CAUTION: This product is intended for use with FCC/CE certified computer equipment. Please check the equipment operating/installation manual and/or with the equipment manufacturer to verify/confirm if your equipment is suitable prior to the installation or use of the product.
Notice for Taiwan Notice for Korea Safety information B급 기기 (가정용 방송통신기자재) Class B Equipment (For Home Use Broadcasting & Communication Equipment) 이 기기는 가정용(B급) 전자파적합기기로서 주로 가정에서 사용하는 것을 목적으로 하며, 모든 지역에서 사용할 수 있습니다. This equipment is home use (Class B) electromagnetic wave suitability equipment and to be used mainly at home and it can be used in all areas.
