User's Manual

Connecting Sonic Carrier to your TV

1. Connect the HDMI cable as shown in the illustration below

2. When TV sound is present, it is output automatically. On Certain TV sets, it might be necessary to press and hold the

“HDMI” button on the remote control to enable TV sound output from the Sonic Carrier.

3. If you are placing the Sonic Carrier on a console, and it is blocking the IR remote control sensor of the TV, please in-

stall the bundled IR transmitter as shown. The transmitter should face the IR remote control sensor of the TV set. Please

note that the IR transmitter requires the Sonic Carrier to be powered On or on Standby mode to work. Do not discon-

nect the Sonic Carrier from mains power.

Connecting Your Sonic Carrier

IR Transmitter for TV