User's Manual

ManualsBrandsCreative Labs ManualsAudio EquipmentCreative X-Fi Sonic Carrier Subwoofer

5. Launch a browser and Enter 192.168.43.1 to enter the setup WebUI

6. Select the WiFi network to connect to, enter the passcode and click on “Save”

7. A confirmation message will be displayed after successful connection.

Video Tutorials

Hit the “Home” button on the remote control to access a series of video tutorials, with

step-by-step instructions on how to best use the Sonic Carrier

User Control Summary

Main Unit Button

Action

Volume Control -

Volume Down

Press-Hold to mute

Volume Control +

Volume Up

Press and Hold to volume up quickly.

X-Fi

Cycles through Off, and all the Sound Experiences

Press once to rewind. In rewind mode, press and hold to auto rewind.

In rewind mode, press again to skip to previous track.

Play/Pause

Toggles between play and pause

Press once to forward. In forward mode press and hold to auto

forward. In forward mode, press again to skip to next track.

A/D

Custom buttons that can be assigned to web services. Short press to

trigger A,

Press and Hold to trigger D.

B/E

Custom buttons that can be assigned to web services. Short press to

trigger B,

Press and Hold to trigger E.

C/F

Custom buttons that can be assigned to web services. Short press to

trigger C,

Press and Hold to trigger F.

Bluetooth

Switch to Bluetooth mode

Press and Hold to goto Bluetooth Pairing

WIFI

Switch to Wifi mode

Press and Hold to goto WIFI Setup

Home

Switch to Android OTT mode, and show home screen. Press and hold

to start connecting to subwoofer

Out

Switch between available outputs like BT-HP, L-OUT-SPK

Mic

Switch between available microphone mode, Mic Vol, Mic Key, Mic

Reverb.

Mic Control -

Decrease the vol, key or reverb for both the microphones, depending

on the microphone mode. In volume mode, press and hold button to

mute.

Mic Control +

Increase the vol, key or reverb for both the microphones, depending

on the microphone mode.

HDMI

Switch between available HDMI Inputs. LED 1-4 will be lighted to

indicate input source.

Switch between available SD Inputs. LED 1-4 will be lighted to indicate

input source.