User manual

Linked mode with Wireless Subwoofer

LED Steady

Link discoverable mode

Rapid blinking LED

IftheZiiSoundD5xLINKLEDisstillRapidlyBlinking,PresstheLINKTouchpad/Buttononceto

stoporwaitforittotimeout.Linkestablishmentcomplete.ReadytoStreammusic.

2.2

Adding one or more ZiiSound D5x and DSx wireless subwoofer

to form a 2.1 or 3.1 speaker system

Note:Itisneccessarytoclearthememoryoflinkedspeakers(allD5x(s)andDSx)shouldyou

requiretocongureanewsetup.(Forexample,addinganotherD5xorDSx)

ProceedtoStep(b)ifyourD5xorDSxhavenotbeenlinkedwithotherspeakerbefore.

IfyourD5xorDSxhavebeenlinkedbefore,followtheinstructionbelowtoclearlinksystem

memorytorecongureanewspeakersetup.

For the D5x(s)

Ensurethespeakerisinstandbymode.PressandholdthePowerON/Standbybuttonlocatedat

therearofthespeakeruntilLINKandCONNECTLEDblinks2timesandgoesoff.TheD5xLink

memory has been cleared.

For the DSx

PressandholdtheLINKButtonlocatedattherearofthesubwooferfor10secondsuntiltheLink

LEDblinks2timesandgoesoff.TheDSxLinkmemoryhasbeencleared.