User's Manual

ADDICT v3.0.1 User Manual DALI Functionality
©2017 All rights reserved - 14 -
DALI Functionality
The DALI menu contains four submenus: – Installation, Configuration, Diagnostics, and Advanced
– and the underlying functionality contained in each of these sub-menus is described in detail in
this section of the user manual.
Installation
The Installation menu contains the most common functions required when installing DALI
devices.
All Min/Max
Continuously sends alternating “Minimum” and “Maximum” commands every 2 seconds to all
connected devices on the line until either the escape or enter button is pressed. This is a quick
way of confirming that all devices connected to the line are responding to DALI broadcast
commands.
Selectable values: none
Random Address
Assigns addresses randomly to the devices on the DALI line. There are two options available
under Random Address – Address New and Address All.
When Address New is selected, only devices that currently do not have addresses assigned to
them will be addressed as those that report addresses will keep their current addresses. If
Address All is selected, all devices will have their addresses cleared and they will then be
randomly addressed.
Before the addressing procedure begins, confirmation is required:
During addressing, a progress bar is displayed for each device while it’s being "located". Once a
device is located, the address it has been assigned is displayed on the screen and then the
ADDICT
®
will then move on to locating the next device.
If Live Preview is enabled, a “Minimum” command is sent to all devices at the commencement of
random addressing, and then each device on the line is sent a “Maximum” command when it’s
assigned an address to show the addressing taking effect.