User's Manual

ADDICT v3.0.1 User Manual DALI Functionality
©2017 All rights reserved - 19 -
Configuration
Each DALI device contains several standard stored settings that affect how it will react to
different commands and events. The Configuration menu contains five functions for changing
these stored settings, as well as a Summary function for quickly viewing the current settings for
a device.
Settings
Cfg Settings is used to configure the stored settings in a device (or group of devices) that require
only one value. The ADDICT V3 features DALI V2 control, allowing V2 settings to be configured.
Device(s) requiring more than one value, such as groups assignments and scenes which have 16
values each are not included here:
• Minimum level
• Maximum level
• System failure level
• Power-on level
• Fade time
• Extended Fade (DALI V2)
• Fade rate
• Defaults?
• Save Memory? (DALI V2)
The Defaults? And Save Memory? Settings are not stored settings, but instead are used to
instruct the device(s) to reset all their settings (including those for group assignments and
scenes) to factory default levels (but does not modify the address of any device) and save
persistent memory (Such as Address, Group, Fade Time, etc). Tip! Save memory can be used if a
DALI device is not saving settings during power fail.
There are 3 selectable values on the Cfg Settings screen – the Address/Group, the setting name,
and the setting value. For addresses of devices that are on the line, the current value for the
setting is displayed when the address or setting name is selected. For addresses of devices that
aren’t on the line or when a group is selected, the current value is replaced with dashes.
When a setting value is displayed, the alternative text for that value will also be displayed (e.g.
percentages for levels, time for fade time and steps for fade rate).
When changing a value, the value in the device is not actually changed until enter is pressed.