User's Manual

ADDICT v3.0.1 User Manual DALI Functionality
©2017 All rights reserved - 31 -
Error or Yes:
An Error or Yes may appear on the screen under a few conditions. On the ADDICT V3, the most
likely reason for the result will also be shown on the screen with the following message:
• “Half b <300us” – The DALI Half bit was less than 300us causing an error
• “Long b <600us” – The DALI Long bit was less than 600us causing an error
• “Incorrect Bit” – The DALI Bit was incorrect, expected a 0, got a 1.
• “Long >1100us” – The DALI Long bit was too long
• “Bus Low Long” – The DALI Bus was held low for too long causing an error
• “Unknown” – Most likely a YES response, otherwise unknown DALI error.