User's Manual

ADDICT v3.0.1 User Manual DMX512 and RDM (Remote Device Management) Functionality
©2017 All rights reserved - 49 -
The increase and decrease buttons change the value shown for the address, and pressing enter
saves the new value into the device. Once set, the address is retrieved again from the device for
confirmation.
Setup Device – Device Info (standard, required)
The Device Info page contains four subpages that display various information about the selected
device. Use the increase and decrease buttons to navigate between the subpages.
Page 1 shows the selected device’s effective DMX512 address range, as well as the currently
selected DMX personality (DMX personalities are explained on page 44).
Page 2 shows the selected device’s product category (shown as hexadecimal values, refer to the
RDM standard for meanings of the values) and the model ID (as set by the manufacturer).
Page 3 shows the number of sub-devices implemented in the selected device (note that
configuration of sub-devices is currently not supported), as well as the number of sensors.
Page 4 shows the RDM version supported by the selected device and the current software
version programmed in the device.