User's Manual

ADDICT v3.0.1 User Manual DMX512 and RDM (Remote Device Management) Functionality
©2017 All rights reserved - 50 -
Setup Device – Software Version Label (standard, required)
The Software Version Label page displays a text description of the software version (instead of
the hexadecimal version shown on subpage 4 of Device Info) currently programmed into the
selected device.
If the software version label is longer than 16 characters, it will scroll across the screen.
The following sections outline the setup pages for the standard parameters that are not required
but are supported by the ADDICT
®
. Also, only pages for parameters that are reported to be
supported by the selected device will be available. The order of the pages will also be the same
as the order that the device reports them to be supported, and this may differ between devices.
Setup Device – Control Field (standard, required)
The Control Field page displays flags about specific properties of the device being queried. The
information is displayed over 2 pages with the up and down arrows used to scroll between the
information.
The 4 flags displayed are Managed Proxy, Sub-Device, Boot-Loader and Proxied Device with the
setting of each flag represented as either Yes or No. The Managed Proxy Flag indicates if the
responder is a Proxy device or not. The Sub-Device Flag indicates if the responder supports Sub-
Devices.
The Boot-Loader Flag indicates if the responder required a firmware upload before it can
operate normally. The Proxied Device Flag indicates that the response has been transmitted by a
Proxy on behalf of an actual device.
Setup Device – Device Model Description (standard)
The Device Model Description page displays a text description of the selected device’s model
(instead of the hexadecimal version shown on subpage 2 of Device Info).