User's Manual

ADDICT v3.0.1 User Manual DMX512 and RDM (Remote Device Management) Functionality
©2017 All rights reserved - 51 -
If the device model description is longer than 16 characters, it will scroll across the screen.
Setup Device – Manufacturer Label (standard)
The Manufacturer Label page displays a text description of the selected device’s manufacturer.
If the manufacturer label is longer than 16 characters, it will scroll across the screen.
Setup Device – Device Label (standard)
The Device Label page displays the selected device’s current programmable device label and
allows for this label to be changed.
If the device label is currently longer than 16 characters, it will scroll across the screen. Pressing
enter will proceed to the editing page for the device label.
The device label editing page allows you to change the device label currently set in the device.
The current length of the label is shown on the 2nd line (minimum length is 0, maximum length
is 32). Up to 14 characters of the label at a time are shown on the 3rd line, and the last line
indicates which character is currently being changed (shown by the up arrow). The square
brackets [ and ] indicate the ends of the label, and < and > indicate that there is more label past
the ends of the extent of the label currently being shown.
Pressing increase and decrease will scroll the currently selected character through all the
possible characters. There is one special character, the end of label character, and it is displayed
as a filled in rectangle. If this character is selected, then the character before it is the last
character in the label when it is stored into the device.