User's Manual

ADDICT v3.0.1 User Manual DMX512 and RDM (Remote Device Management) Functionality
©2017 All rights reserved - 52 -
Pressing up and down will move the arrow left and right along the label, selecting the character
that can be changed. Moving past the ends will cause the display to scroll appropriately.
Pressing enter will store the new label into the selected device. After storing, the label will be
retrieved from the device to confirm that is has changed. Pressing escape returns to the view-
only page for the Device Label.
Setup Device – Factory Defaults (standard)
The Factory Defaults page can be used to reset the selected device’s current settings back to
their default values.
Press the increase or decrease button to select yes or no. Press the enter button to confirm the
selection. Note that it is up to the manufacturer of the device to decide upon which settings are
restored to their default values.
Setup Device – Boot Software Version ID (standard)
The Boot Software Version ID page displays the current version of the boot software
programmed in the selected device. The format of the 32-bit value is chosen by the
manufacturer.
Setup Device – DMX Personality (standard)
The DMX Personality page allows for the DMX Personality of the selected device to be changed.
A DMX personality defines the functionality for each channel in the device’s DMX footprint (i.e.
how many channels it listens to). Different personalities may have different sized footprints.
The DMX Personality page shows which personality is currently selected, how many channels are
in its DMX footprint and a description of the personality.
The following example shows a DMX personality for a Control Freak
®
SLAMMO
®
3-channel
dimmer. Per the description, the personality uses 8-bit dimming, so there are only 3 channels in
the footprint (one for each output channel).