User's Manual

ADDICT v3.0.1 User Manual DMX512 and RDM (Remote Device Management) Functionality
©2017 All rights reserved - 53 -
Press the increase and decrease buttons to scroll through the available personalities for the
selected device. Press enter to store the selected personality as the current personality for the
device.
Setup Device – Reset Device (standard)
The Reset Device page allows for the selected device to be reset remotely. There are two types
of reset available, a warm reset and a cold reset. Typically, a cold reset is the equivalent of
removing and reapplying power to the device, but the actual functionality of both reset options
depend on the manufacturer.
Press the increase and decrease buttons to select the type of reset to perform. Press enter to
send the selected reset command to the device.
Setup Device – Proxied Device Count (standard)
The Proxied Device Count page displays the Device Count and List Change flag. The Device Count
represents the number of devices being handled by the Proxy. The List Change flag is set if the
devices represented by the Proxy have changed since last checking the Proxy Device list.
Setup Device – Proxied Devices (standard)
The Proxied Devices page displays a list of the UIDs of devices represented by the selected Proxy.
The UIDs can be scrolled through using the increase and decrease buttons. If the Proxy has more
than 38 UIDs to transmit, multiple packets will need to be used to receive all the UIDs.
Pressing enter will request additional packets from the Proxy. When viewing the final packet, if
an additional packet is requested the first packet will be redisplayed. The packet being viewed is
displayed on the 2
nd
line.
Setup Device - Manufacturer-Specific Parameters (non-standard)
As mentioned earlier, as well as the standard RDM parameters, a device may also implement
manufacturer-specific parameters. As the ADDICT
®
cannot possibly implement special
functionality for all the manufacturer-specific parameters for all device manufacturers, it relies