User's Manual

ADDICT v3.0.1 User Manual Introduction
©2017 All rights reserved - 8 -
Using the ADDICT
Keys/Buttons
Name
Image
Function
Power
Turns the ADDICT
®
On or Off
Up
Navigate up in menus and select the previous value on function screens. If
pressed while on the first item/value, selection will wrap around to the last
item/value
Down
Navigate down in menus and select the next value on function screens. If
pressed while on the last item/value, selection will wrap around to the first
item/value
Increase
Increases the currently selected value by 1. Holding down the button will cause
the value to be increased faster. If pressed while on the maximum value, it will
wrap around to the lowest possible value
Decrease
Decreases the currently selected value by 1. Holding down the button will cause
the value to be decreased faster. If pressed while on the minimum value, it will
wrap around to the highest possible value
Enter
Select an item in a menu and if the final value on a function screen is selected,
execute the function using the selected values. If the final value is not selected,
the next value will be selected.
Escape
Return to the previous menu and exit a function and return to the menu.
Backlight
Briefly pressing the backlight button will cause the LCD backlight to toggle
between on and off. If held down for more than a second, the internal DALI line
power supply will also be turned off (if currently activated)
LEDs
Name
Colour
On
Flashing
Flashing twice
Off
DALI
Bus
Status
Green
An external
line (bus)
power
supply has
been
detected
The ADDICT
®
is
supplying line
power
The ADDICT
®
is in SCI
TX (transmit) Mode
No external line power
supply detected &
the ADDICT
®
isn’t
supplying power
Battery
Orange
The 9V internal
battery is low.
Battery is healthy
Connectors (Top Panel)
Type
Function
4mm banana female sockets
x 2
Connects the ADDICT
®
to a DALI line via the supplied universal lead set
with 2 x 4mm banana jacks.
Male 2.1mm power socket
Allows for an external 24VDC (9-24V; >15V (eg 24V) required if powering
the DALI line) supply to be used to power the ADDICT
®
. Mechanically
switches battery off when external power plug is inserted – the ADDICT
®
will turn off during switch over.
RJ45 socket
Used for PC communications and DMX
512
/RDM