Instructions

ManualsBrandsCreative Stair Parts ManualsStair Newel Posts4191 56 ETPMD

Box Newel Sleeve

4175-SL Box Newel Sleeve

Available in Oak, Poplar & Maple

• Box Newel Sleeves enhance your 4075

Box Newel by creating a larger base

with minimal cost

• Easily slides over your 4075 Box

Newel for a beautiful custom hand

crafted look

• Smaller footprint box newel to use in

areas where a standard box newel will

not work

• Box Newel Sleeves from

Creative Stair Parts are milled to

match Creative’s 4075 Box Newel and

are available in:

Oak – 4175 SL OAK

Maple – 4175 SL MAPLE

Poplar – 4175 SL POPLAR

4075 Box

Newel

4175-SL

Box

Newel

Sleeve

66"22-1/4"

4-1/4"

3-1/2"

Summary of content (5 pages)

PAGE 1
Box Newel Sleeve 4175-SL Box Newel Sleeve Available in Oak, Poplar & Maple 66" • B ox Newel Sleeves enhance your 4075 Box Newel by creating a larger base with minimal cost 4075 Box Newel • E asily slides over your 4075 Box Newel for a beautiful custom hand crafted look • Smaller footprint box newel to use in areas where a standard box newel will not work • B ox Newel Sleeves from Creative Stair Parts are milled to match Creative’s 4075 Box Newel and are available in: Oak – 4175 SL OAK Maple – 4175
PAGE 2
Box Newel Installation Instructions Open Tread and Balcony Installation IMPORTANT: Please read all instructions thoroughly before beginning. For final installation, always use an approved adhesive at every assembly joint. 4091MB Mounting Block The following instructions are designed to be used for the installation of box newels using the 4091MB Box Newel Mounting Block. These instructions assume the location of each box newel has already been marked on the stairway and balcony.
PAGE 3
Box Newel Installation Instructions Kneewall Installation IMPORTANT: Please read all instructions thoroughly before beginning. For final installation, always use an approved adhesive at every assembly joint. Kneewall Installation 1. Mark the balustrade centerline on the kneewall. 2. Cut the newel to length. 3. Make a mounting block from 3/4" plywood or 2" x 4" to fit between the corner bracing on the inside of the bottom of the box newel. Glue the block inside of the newel to the back panel. 4.
PAGE 4
075 Box Newel Installation Instructions Open Tread and Balcony Installation IMPORTANT: Please read all instructions thoroughly before beginning. For final installation, always use an approved adhesive at every assembly joint. Installation with Sleeve on Open Tread Stairway or Balcony 1. Trim the bottom of the newel and/or sleeve to the proper length. If necessary, cut and notch the newel and/or sleeve over the edge of the tread/ riser or over the edge of the balcony.
PAGE 5
4075 Box Newel Installation Instructions Open Tread and Balcony Installation IMPORTANT: Please read all instructions thoroughly before beginning. For final installation, always use an approved adhesive at every assembly joint. 4075 Box Newel Installation with Sleeve on Kneewall Stairway 1. Trim the bottom of the newel to the proper length. If necessary, trim the sleeve to the desired length. 4175SL Box Newel Sleeve 2. Slide the 4175SL Sleeve onto the bottom of the box newel.