User's Manual Part 3

59
Pre-Ride Inspections
Item Inspection Procedure
General
Engine Oil Check the oil level. See page 60.
Fuel Check the fuel level. See page 65.
Fluid Leaks Check the vehicle and the ground/floor for any fuel, oil or hydraulic fluid leaks.
Tires Inspect condition, pressure and tread depth. See page 61.
Brake Operation Inspect pedal and lever movement.
Brake Fluid Levels Check front and rear brake fluid levels.
Brake Components Inspect hoses and connections.
Throttle Inspect hand grip and throttle movement.
Clutch Check lever operation and freeplay.
Front Suspension Check for leaks, debris and damage.
Steering Check for smooth operation by turning handlebars full left and full right.
Rear Suspension Check mounting and inspect for leaks. CHIEFTAIN: Check shock movement and air pressure, verify ground
clearance.
Ride Height Make sure preload is adjusted properly for load. See pages 88-91.
Rear Drive Belt Check for wear or damage. Check drive belt tension. See pages 86-87.
Sidestand Verify smooth operation, inspect pivot bolt and spring.
Fasteners Inspect for loose, damaged or missing fasteners.
Mirrors Adjust for proper rear view.