User's Manual Part 4

107
Maintenance
Headlight Aim Inspection
On high beam, the center of highest intensity
(appearing as a diamond shape) should be 7.5 in. (19
cm) lower than the headlamp bulb and centered
straight ahead at 25 feet (7.6 m).
1. Verify that tire pressure is at specification. See page
104.
2. Verify that rear suspension ride height (preload) is
at specification. See page 88.
3. Position the motorcycle on a level surface with the
headlight 25 feet (7.6 m) from a wall.
4. With the operator and passenger (if applicable) on
board, bring the motorcycle to the fully upright
position.
5. Start the engine and switch the headlamp to high
beam. Observe the headlight aim on the wall.
6. Make any necessary adjustments to headlight aim.
See page 108.
25 ft. (7.6 m)
Headlamp bulb
7.5 in. (19 cm)
center height