User's Manual Part 4

77
Operation
Using Cruise Control
Set Speed
1. Press and release the cruise on/off
switch. The amber cruise control
indicator will illuminate in the
instrument cluster. Cruise control
is enabled, but not set.
2. Accelerate to the desired speed
and press the SET/DEC switch.
The green cruise control indicator
lamp will illuminate. Cruise
control is set to the desired speed.
Resume Speed
After disengaging the cruise
control with the brake, throttle or
clutch, press the RES/ACC switch
to return to the set speed.
Accelerate
While cruise control is engaged, tap and release the RES/
ACC switch to increase speed in approximately 1 MPH (1-2
km/h) increments. Press and hold the RES/ACC switch to
accelerate to a new set speed (resets when switch is
released).
Tip: If you use the throttle to accelerate and then release it, the
cruise control will resume the previously set speed.
Decelerate
While cruise control is engaged,
tap and release the SET/DEC
switch to decrease speed in
approximately 1 MPH (1-2 km/h)
increments. Press and hold the
SET/DEC switch to decelerate to a
new set speed (resets when switch
is released), or to the minimum cruise speed of 20 MPH (32
km/h).
Cancel Cruise Control
To temporarily cancel the cruise control and allow use of the
resume feature:
• apply the brakes or
• close the throttle
• disengage the clutch
To cancel the cruise control and erase the set speed from
memory, press the cruise on/off switch.
Cruise
On/Off
Switch
Set
Speed
Resume or
Accelerate
Decelerate