User's Manual Part 5

153
Audio System
Selecting Audio Sources
USB Audio Source - iPod / iPhone Connected
1. Connect a compatible iPod or iPhone device to the USB
connector cable.
2. Press and release
until
iPod is the active source.
When iPod is active, the console
screen will display “iPod” as the
active source.
Tuning/FF - RW
1. Press and release or to select the next or previous
song.
2. Press and hold or to fast forward or rewind.
Direct Song Selection
1. Press and release to display currently playing track
list.
2. Press and release or to scroll track list.
3. Press and release or to select the new song
choice and exit to active source display.
4. Press to exit without selecting a new song track.
Category Select
1. Press and hold until the
category list appears.
Tip: Pandora will appear only if device is
connected via USB and is capable of
running Pandora.
2. To navigate the categories, press
and release or . Press and
hold to continuously scroll through the list.
3. Press and release or to select new category.
4. Press and release
to exit to the main menu.
5. To navigate from the category
menu to the sub-category menu,
press or .
6. Press and release or to
scroll.
7. Press and release to select new subcategory and
play the first song found. Press to browse the list of
songs available.
8. Press to navigate back to the subcategory or
category selection.