User's Manual Part 5

164
Audio System
Audio Mode Menus
Bluetooth Setup Menu
Driver Headset Pairing
Incoming phone calls cannot be answered if driver headset
is not connected. Press and release or to send
the calls to voice mail.
1. Press and hold to access the audio menu.
2. Press and release
until “BLUETOOTH SETUP” is
displayed.
3. Press and release to access the Bluetooth Setup
Menu options.
4. In the Bluetooth Setup Menu,
press or to make a
selection. Select DRIVE H-SET.
5. Press and release .
6. Press to select ADD H-SET.
Tip: Sena SMH10 motorcycle Bluetooth
headsets are recommended.
Reference the headset user manual
to enable Bluetooth pairing.
The radio will search for the
headset.
7. When the headset is found, its
name will be displayed.
8. Press and release to pair the
headset with the radio.
9. The radio will display “PAIRING”
during the pairing process.
Tip: If prompted to enter a pairing code,
find the code in the headset user’s
manual.
Use or to enter the digits 0-9.
Press and release to enter the number and move to the
next digit. Default codes are typically: “0000” or “1234”.
“PAIRED” is displayed on the
screen when the radio has
successfully paired the headset.