User's Manual Part 2

24
Instruments, Features and Controls
Switches
Symbol Switch Description
Emergency Flasher
Switch (Hazard
Switch)
The hazard switch activates and cancels the emergency flashers. See page 25.
High/Low Headlight
Beam Switch
The high/low headlight beam switch toggles the headlight between high beam and low beam. See page
27.
Auxiliary Light
Switch
Press the
auxiliary light switch to turn the auxiliary lights off or on. See page 27.
Horn Switch To sound the horn, press the horn switch.
Turn Signal Switch Move the switch to the left to activate the left turn signals. Move the switch to the right to activate the right
turn signals. A signal will deactivate automatically when speed or distance reach predetermined levels.
To cancel a signal manually, move the switch to the center position and push it inward.
Momentary Feature: Move the turn signal switch left or right and hold it in that position for at least one second.
The momentary feature will activate and the signal will then cancel when the switch is released.
Stop/Run Switch Press the bottom of the switch (RUN) to allow the engine to start and run. Press the top of the switch (STOP)
to stop the engine. See page 25.
Starter Switch Use the starter switch to start the engine. The engine stop/run switch must be in the RUN position. See
page 26.
Power Switch The power switch is located above the instrument gauge. Press and release the power switch to enable or
disable all electrical power to the vehicle. See page 25.
Saddlebag Lock
Switch
Press the lock switch to lock or unlock the saddlebags. The key fob can also be used to lock or unlock the
saddlebags.