User's Manual Part 2

Instruments, Features and Controls

Switches

Engine Starter Switch

Read the engine starting

procedures before starting the

engine. See page 70.

The power switch does not have

to be on to start the engine.

Press and hold the starter switch

to engage the one-touch starting

feature, which activates the

electrical system and starts the

engine. The engine stop/run

switch must be in the RUN

position and the transmission

must be in neutral.

Keyless Ignition

When the electrical system is activated with either the

power switch or the starter switch, the key fob must be

within range. If the key fob is not detected, the security light

and/or power switch will flash. The electrical system will

automatically shut down.

The starter motor will not engage during this time. If a key

fob is not available, your personal identification number

(PIN) can be entered using the turn signal switches to

unlock the security system. See page 114.

Saddlebag Lock Switch

If your model is equipped with electric saddlebag locks, the

locks can be controlled by either the key fob or the lock

switch on the console. When using the console lock switch,

the key fob must be within range. If the key fob is not

detected, the security light and/or power switch will flash.

The system will not perform the lock or unlock command.

Starter Switch

Saddlebag

Lock Switch

Key Fob

Lock

Unlock