User's Manual Part 2

27
Instruments, Features and Controls
Switches
Ignition/Light Switch
The headlights automatically come on when the engine is
started.
WARNING! Motorcycle riders must remain as visible as possible at
all times. To aid in this, the headlight must be on at all times. Do not
modify the ignition/light switch wiring to circumvent the automatic
headlight feature.
Toggle Switches
All models are equipped with toggle switches on the front
side of the left and right handlebar controls. The LEFT-
TOGGLE switch is active for all models. The RIGHT-TOGGLE
switch is active only for CHIEFTAIN models.
The power switch must be ON. Use the switches to toggle
through the modes of the multi-function display and to
change settings in the display.
High/Low Headlight Beam Switch
The high/low headlight beam switch toggles the headlight
between high beam and low beam. To activate the high
beam, press the upper portion of the switch. To activate the
low beam, press the lower portion of the switch.
The headlights operate only when the engine is running.
You can use the high/low headlight beam switch to override
this function and allow the headlights to operate when the
engine is not running. Turn the power switch on, then toggle
the high/low headlight beam switch to turn the headlights
on.
Auxiliary Light Switch
The auxiliary lights provide additional lighting on each side
of the headlight. Some drivers prefer using the auxiliary
lights when operating in foggy conditions or when passing a
vehicle to help improve visibility to other motorists.
Press the auxiliary light switch to turn the auxiliary lights on
or off. The auxiliary lights turn off when the power switch is
turned off. The auxiliary lights automatically turn on when
the engine starts if they were on when the engine was shut
down.
LEFT-TOGGLE
Left Control Right Control
RIGHT-TOGGLE
(Active for CHIEFTAIN only)