User's Manual Part 4

114
Maintenance
Electrical Precautions
Be aware of the following precautions regarding the
electrical system to avoid disruption of electrical signals
and possible system malfunction.
• DO use ONLY genuine INDIAN MOTORYCLE parts and
accessories designed for your model, and follow the
instructions provided.
• DO use the accessory power jack provided (if equipped).
• If it is necessary to provide power to an item that does not
use one of the previously mentioned power jacks, connect
to the load side of the main circuit breaker (under the
cover behind the oil cooler), and connect the ground wire
to the engine ground at the front left side of the crankcase
(near the circuit breaker).
• DO NOT splice or cut any wires.
• DO NOT tap in to any power or ground on the motorcycle
unless specifically directed to do so by the INDIAN
MOTORYCLE instructions that come with the kit.
• DO NOT back-probe electrical connectors on the vehicle
unless directed to do so by the INDIAN MOTORCYCLE
Service Manual.
• DO NOT power any accessories from the diagnostic
connector (under left side cover).
Unlocking the Security System
If a key fob is not available, your personal identification
number (PIN) can be entered using the turn signal switches
to unlock the security system. Use the following guide to
enter your valid PIN.
Digit to Enter
Turn Signal
Featu r e Use d
Procedure
The number “0” CANCEL switch Press and release
First digit (1-9) LEFT turn switch Move and release
once per digit
value. See example
below.
Second digit (1-9) RIGHT turn switch
Third digit (1-9) LEFT turn switch
Fourth digit (1-9) RIGHT turn switch
Example for entering the number 1024:
LEFT - CANCEL - LEFT - LEFT - RIGHT - RIGHT - RIGHT - RIGHT