User's Manual Part 4

115
Maintenance
Changing Your Security System PIN
To change your PIN, you must have either the key fob or your
existing valid PIN available to gain access to the security
system. If the key fob is not detected or is not available and
you cannot remember your PIN, please see your INDIAN
MOTORCYCLE dealer.
Please read the entire procedure before beginning.
1. Turn the power switch on. Do NOT start the engine. The
security light and/or power switch will turn on briefly
until the key fob is detected or the valid PIN is entered.
2. When the key fob is detected, the security light and/or
power switch will turn off. Proceed to step 4. If the key
fob is not available or is not detected, enter your valid
PIN within 20 seconds. See page 114.
Tip: If the valid PIN is not entered within 20 seconds, the security
light and/or power switch will flash for 10 seconds, then the
system will shut down. Return to step 1 to try again.
3. When the PIN is accepted, the security light and/or
power switch will turn off. Proceed to step 4.
4. When the security light and/or power switch turns off,
press and hold the turn signal CANCEL switch for 10
seconds. The security light and/or power switch will
turn on to confirm access to the security system.
Proceed to step 5 to enter your new PIN.
Entering Your New PIN
5. Enter your new 4-digit PIN.
6. If 4 digits are successfully entered, the security light
and/or power switch will remain on and the horn will
sound briefly. Proceed to step 7.
Tip: If the 4-digit PIN is NOT successfully entered within 20 seconds,
the security light and/or power switch will flash for 10 seconds,
then the system exits the procedure. Return to step 1 to try
again.
7. Re-enter the new 4-digit PIN. If this entry matches the
first entry, the security light and/or power switch will
turn off and the horn will sound briefly. Your new PIN has
been saved.
Tip: If the second entry is not entered within 20 seconds or does not
match the first entry, the security light and/or power switch will
flash for 10 seconds, then the system exits the procedure. The
new PIN was NOT saved. Continue to use your former valid PIN.
Return to step 1 to try again.