User's Manual Part 4

Operation

Using Cruise Control

The cruise control switches are located on the right

handlebar. Read this section and understand how to safely

operate this feature before using the cruise control.

WARNING! Improper operation of cruise control could cause loss

of control and result in serious injury or death. Follow all cruise

operation procedures carefully. Never use cruise control when roads

are wet or slippery. Do not use cruise control when riding in heavy or

congested traffic.

Cruise Control Tips

• Cruise control can be set in gears 4-6.

• Vehicle speed must be above 20 MPH (32 km/h).

• Set speed will vary slightly in hilly terrain.

• Cruise control will not resume a pre-set speed if the resulting

acceleration or deceleration rate is too high or too low. For

example, resuming a set speed from 40 MPH (64 km/h) while in

6th gear may cause cruise to disengage.

• Cruise control will not engage if brake lights are not operating

properly.

• The clutch or either brake must have been activated at least once

since the engine was started for the cruise control to function.

Cruise On/Off

Switch

Resume/Accelerate

Switch

Set/Decelerate

Switch