User guide

Choose one of the seven bitrate values to
achieve an optimal sound quality.
Smaller bitrate values can be applied in
sources with low bitrate, for example
when listening to an audiobook. The less
is the value, the less resources do
processor and radiomodul need. On some
handhelds with a slow processor
dropouts of sound fragments are possible
due to the lack of processor time.
Softick Audio Gateway built-in audio
filter activates automatically for
audiodata with low bitrate (e.g.
audiobooks). Disable Filter option
disables the operation of the filter.
Fig. 13: Quality adjustment
Faster Analysis. This mode was used in
previous versions of Audio Gateway.
When the option is on, the subprogram of
stream processing is faster, but sound
quality is worse, especially for low-rate
sound.
Simple Bits Allocation allows to install a
bit distribution using SNR method
instead of LOUDNESS. This method is
slower, but you can achieve higher
sound quality (the mode will be changed
only after the reconnection of headphones
is done). To learn more read A2DP
specification.
Use Generic Stereo Only disables
JOINT STEREO coding. You can switch
this option off in order to achieve a better
sound quality.
Disable Volume Control switches a
scaling subprogram in Audio Gateway
off. If this option is switched on,
programs won't be able to adjust the
sound volume, but the headphones will
Softick Audio Gateway http://www.softick.com/bluetooth-audio/ Page 11 of 17
Fig. 12: Configuration