User guide
Setting Up Your CD-R Drive 2-11
2. If you have an audio card installed in your system, connect the
CD Audio cable to the CD Audio connector on the audio card
as shown in Figure 2-15.
3. If you do not have an audio card installed in your system,
connect a headphone or powered speakers to the Stereo Phone
jack on your drive’s front panel. Set the volume controls of
your drive and powered speakers to minimum before powering
on (or resetting) the system. This is to prevent possible damage
to the headphone or speaker.
Figure 2-15: Connecting the CD Audio cable to the audio card.