User guide

Connecting With Other Devices 3-3
❑
Each device on the SCSI bus should have at least 4 to 6 inches
of cable between them (see Figure 3-1).
❑
The SCSI bus must have only two terminating devices. One at
the begining, the other at the end of the SCSI bus (see Figure
3-2).
Termination must occur wthin 4 inches of the ends of
the SCSI bus.
❑
It does not make any difference where each ID is placed along
the SCSI bus — that is, the ID numbers do not have to be in a
sequential order. As long as no two devices (including the
adapter card) along the bus have the same ID.
Figure 3-2: Acceptable SCSI bus connections.