User Manual

1-8 Installing Video Blaster WebCam 3
9. When the drivers are installed, click the Finish button.
10. Proceed to install the applications for WebCam 3.
In the CD-ROM drive, insert the Video Blaster WebCam CD.
You may have to remove the Windows 2000 CD first.
The setup program runs automatically and a dialog box listing the available applications
appears.
11. Select Video Blaster WebCam Control and the other applications you want to install. Do
not, however, select Internet Explorer (IE) 5.0.
A check mark indicates that an application is selected.
Note: If you want to install IE 5.0, do the following
after
Step 12 is completed: run
D:\CTRUN\CTRUN.EXE and select only the IE 5.0 application.
12. Follow the instructions on the screen to complete the installation.
You may be asked, after an application is installed, if you want to restart your computer.
Select No until all the drivers and applications you selected are installed.
Then restart your computer.
Verifying the installation
in Windows 2000
1. Right-click the My Computer icon on your desktop.
2. On the menu that appears, click Properties.
3. In the System Properties dialog box, click the Hardware tabbed page.
4. Click the Device Manager button. A window appears.
5. Click the plus (+) sign next to the Imaging Device icon.
The entry “Video Blaster WebCam 3 USB (WDM)” should appear.