User Guide

ManualsBrandsCreative ManualsOtherHS-1200

• Do NOT operate the Digital Wireless headset system with other power adaptors.

Contact Creative Customer Support should you need a replacement power adaptor.

• Do not attempt to service any part of the digital wireless headset / USB transceiver yourself

as opening or removing covers may exposed you to dangerous voltage or other hazards.

Refer all servicing to qualified service personnel.

Technical Specifications

• Digital Wireless Technology: Proprietary 2.4 GHz Radio Frequency for advanced 2-way

transmission.

• Range: Up to 22 meters * (72 feet *) in a typical environment.

• Listen Time (per charge): Approximately 8 hours.

• Standby time: Up to 3 months.

• Charging time: 2.5 hours

• Charging Method: Through USB powered Transceiver DC out.

• Battery type: Lithium polymer

• Low battery indication: 3 beeps repeated every 5 seconds.

• Connectivity: USB 1.1

• USB Cable length: 80 cm/2.6 feet.

• Net Weight (without packaging): USB Transceiver – 60 g

Digital Wireless Headset – 155 g

Headphone

• Driver: 40mm Neodymium magnet.

• Frequency Response: 20 Hz ~ 20 kHz.

• Impedance: 32 ohm

Microphone

• Type: Noise cancelling condenser

• Frequency Response: 100 Hz-16 kHz

• Impedance: <10 kohm

System Requirement

• Intel

Pentium

4 1.6 GHz, AMD

Athlon XP 2000+ processor or faster

(Pentium

4 2.2 GHz, AMD

Athlon XP 2400+ processor or faster recommended)

• Intel

, AMD

or 100% compatible motherboard chipset

• Microsoft

Windows Vista

32-bit or 64-bit, Windows

XP Professional x64 Edition,

Windows

XP Service Pack 2 (SP2)

• 512 MB RAM

• 600 MB of free hard disk space

• CD/DVD-ROM drive

• One available USB port (for the USB transceiver)

• Installed and launched Windows Live

Messenger or MSN

Messenger to answer / end

calls. Skype

requires manual configuration.